How To Program A Ur2-cbl-cv04

by
Remote Codes‎ > ‎Cablevision‎ > ‎

UR2-CBL-CV04


1. Turn on the TV.
2. Press the TV button and the SEL button simultaneously for 3 seconds.
Note: The iO button will turn on indicating the unit is ready to be programmed. The iO button will light on for 20 seconds. The next step must be entered while the iO button is on.
3. Point the remote control toward the TV and
enter the three-digit code.
Remote Code
031

4-Press Mute button.
Note: The TV will turn off automatically if its the setup is successful.
The remote control manual is available here: http://www.universalremote.com/resources/pdfs/UR2-CBL-CV04.pdf

You can use the Cablevision remote included with your cable service to control more than just your set-top box. Synchronize your TV with the remote so you don't have to worry about fumbling with multiple controls just to turn on your TV. The remote is designed to work with TVs from a number of manufacturers and does not require any additional tools or software to be programmed.

Step 1

Find your TV's manufacture in the list of codes included in the remote's manual. Record the three-digit codes for your TV.

Step 2

You don`t program a simplink remote. The LG simplink system lets you control all of the devices that are hooked up to the TV with the press of a button. If you turn off your TV, then all of those devices will also turn off. Via YouTube Capture. Elizabeth Warren Discusses Iran, Avoiding War and Trump’s Impeachment Trial - Duration: 6:54. Late Night with Seth Meyers Recommended for you.

Turn on the TV you want to program, and point the remote at the TV. What was the context of the primary sources production of 1935 constitution. Press the 'TV' button, and 'SEL' button at the same time until the 'iO' button lights up.

Step 3

Codes

Enter the first three-digit code into the remote's keypad. Your TV will turn off when the correct code is entered. Repeat the steps for each code until your TV powers off when you enter a code.

Press the 'TV' button once the correct code is entered to save the code in the remote.

More Articles